BTS70082EPAXUMA1
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G14 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 7.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 35 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 28V |
| Turn-Off Delay Time | 25 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3.1V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Screening Level | AEC-Q100 |
| Turn On Time | 110 μs |
| Output Peak Current Limit-Nom | 7.5A |
| Rds On (Typ) | 9m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 100 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.15mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
BTS70082EPAXUMA1 Overview
It is packaged in the form of a Tape & Reel (TR).This package is included in 14-TSSOP (0.154, 3.90mm Width) Exposed Pad.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 2.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.It contains 14 terminations.It consists of 1 functions.A supply voltage of 13.5V leads to high efficiency.It is part of the PROFET? series.This results in a 7.5A output current.The LED driver is configured with a maximum supply voltage of 18V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 6V.
BTS70082EPAXUMA1 Features
Supplied from 13.5V
BTS70082EPAXUMA1 Applications
There are a lot of Infineon Technologies BTS70082EPAXUMA1 Power Switches ICs applications.
- USB Protection
- Portable GPS Device
- Set-Top Boxes
- Smartphone and PDA
- HDD, SSD
- Telecom and Network Systems
- Hot Swap
- Wireless/Networking Cards
- Wireless Modem Data Cards
- Gaming
