BTS70102EPAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Series | Automotive, AEC-Q100, PROFET® |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 6V |
| Number of Channels | 1 |
| Interface | On/Off |
| Current - Output (Max) | 6.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 28V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3.1V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Output Peak Current Limit-Nom | 6.5A |
| Rds On (Typ) | 9.5m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
BTS70102EPAXUMA1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the 14-TSSOP (0.154, 3.90mm Width) Exposed Pad package.This lighting drivere has a mounting type of Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has a total of 2 outputs.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.There are Slew Rate Controlled features available on the LED driving board.A total of 14 terminations have been found in it.It is important to note that the LED driving board has 1 functions.The LED driver output is limited to 6.5AV.A supply voltage of 13.5V leads to high efficiency.A component of this type is included in the Automotive, AEC-Q100, PROFET? series.In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.The total number of channels is 1.
BTS70102EPAXUMA1 Features
Supplied from 13.5V
1 channels
BTS70102EPAXUMA1 Applications
There are a lot of Infineon Technologies BTS70102EPAXUMA1 Power Switches ICs applications.
- Notebook and Tablet Computers
- Portable Music Players
- Hot Swaps
- HDD and SSD
- PDAs
- Hot Swap
- USB Power Distribution
- Mobile Communication Devices
- USB Ports/Hubs
- Portable Devices
