Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.154, 3.90mm Width) Exposed Pad |
Surface Mount |
YES |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2017 |
Series |
Automotive, AEC-Q100, PROFET® |
Feature |
Slew Rate Controlled |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2A (4 Weeks) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
13.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
JESD-30 Code |
R-PDSO-G14 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Supply Voltage-Max (Vsup) |
18V |
Supply Voltage-Min (Vsup) |
6V |
Interface |
On/Off |
Current - Output (Max) |
5A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Nominal Input Voltage |
28V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
3.1V~28V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
Turn On Time |
110 µs |
Output Peak Current Limit-Nom |
5A |
Rds On (Typ) |
12.7m Ω |
Turn Off Time |
100 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Output Current Flow Direction |
SINK |
Height Seated (Max) |
1.15mm |
Length |
4.9mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
BTS70202EPAXUMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the 14-TSSOP (0.154, 3.90mm Width) Exposed Pad package.The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled features.The termination count is 14.As far as functions are concerned, the lighting driver has 1.This LED driver has a maximum output of 5AV.As long as the supply voltage is 13.5V, high efficiency can be achieved.It belongs to the Automotive, AEC-Q100, PROFET? series.A maximum supply voltage of 18V is set in Vsup.In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.
BTS70202EPAXUMA1 Features
Supplied from 13.5V
BTS70202EPAXUMA1 Applications
There are a lot of Infineon Technologies BTS70202EPAXUMA1 Power Switches ICs applications.
- USB Power Distribution
- Gaming
- Wireless/Networking Cards
- Portable/Handheld Devices
- Hot Swap
- Telecom and Network Systems
- PC Card Hot Swap
- Portable Devices
- Hot-Swap Systems
- PDAs