BTS707NTMA1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 20 |
| Packaging | Tape and Reel |
| Number of Terminations | 20 |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Number of Outputs | 2 |
| Supply Voltage-Max (Vsup) | 58V |
| Supply Voltage-Min (Vsup) | 5.8V |
| Power Dissipation-Max | 3W |
| Nominal Supply Current | 2.2mA |
| Power Dissipation | 3W |
| Current - Output | 1.6A |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Turn On Time | 80 µs |
| Output Peak Current Limit-Nom | 2.8A |
| Turn Off Time | 70 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Width | 7.6mm |
| RoHS Status | RoHS Compliant |
BTS707NTMA1 Overview
Tape and Reel-shaped packaging is used.There are 20 terminations in total.Device DUAL is located at the terminal position.An efficient supply voltage is possible with 12V.Hot-swappable device is necessary to use 20 pins in order to operate the device.The position of the object is in the direction of Surface Mount.Operating at 150°C°C allows for stable operation.To maintain reliability, it functions at a minimum working temperature of -40°C degrees Celsius.Normally, Vsup should remain above 5.8V.Vsup (maximum supply voltage) is set to 58V.Hot Swap is set to output 2 by default.
BTS707NTMA1 Features
BTS707NTMA1 Applications
There are a lot of Infineon Technologies BTS707NTMA1 hot swap controllers applications.
- Datacom
- Overvoltage protection
- Automatic restart after load failure
- Redundant-array-of-independent-disk (RAID) storage
- Remote access server
- Industrial high-side switches
- Reverse current protection
- Overcurrent protection
- USB interface
- Base station
