BTS70802EPAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Series | Automotive, AEC-Q100, PROFET® |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G14 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 28V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3.1V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Turn On Time | 110 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 23.1m Ω |
| Turn Off Time | 100 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.15mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
BTS70802EPAXUMA1 Overview
Tape & Reel (TR) is the way it's packaged.The 14-TSSOP (0.154, 3.90mm Width) Exposed Pad package contains it.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.By default, it is set to output 2.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts has been specified.The lighting driver has Slew Rate Controlled features.A total of 14 terminations have been found in it.Currently, the lighting driver has a total of 1 functions.There is a maximum output of 3AV from the LED driver.As long as the supply voltage is 13.5V, high efficiency can be achieved.This electrical component is part of the Automotive, AEC-Q100, PROFET? series.Vsup (maximum supply voltage) is set to 18V.In order to operate normally, the supply voltage (Vsup) must remain above 6V.
BTS70802EPAXUMA1 Features
Supplied from 13.5V
BTS70802EPAXUMA1 Applications
There are a lot of Infineon Technologies BTS70802EPAXUMA1 Power Switches ICs applications.
- Wireless/Networking Cards
- USB Protection
- Portable Video Game Players
- HDD and SSD
- Smartphone and PDA
- Portable Music Players
- Hot-Swap Systems
- Set-top-box
- PC Card Hot Swap
- Hot Swaps
