BTS716GBXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS716 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 2.3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~40V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Turn On Time | 250 µs |
| Output Peak Current Limit-Nom | 5.3A |
| Rds On (Typ) | 110m Ω |
| Turn Off Time | 270 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.6mm |
| Length | 7.5mm |
| RoHS Status | ROHS3 Compliant |
BTS716GBXUMA1 Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 20-SOIC (0.295, 7.50mm Width).It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 4.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.In terms of features, the LED driving board has Status Flag.It comes under the family of BTS716.A total of 20 terminations can be found in it.It is important to note that the LED driving board has 4 functions.The maximum output of the LED driving board is 2.3AV.Supply voltages of 12V allow for high efficiency.A total of 20 pins are present on it.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 5.5V.This part's power supply is 12V.
BTS716GBXUMA1 Features
Supplied from 12V
BTS716GBXUMA1 Applications
There are a lot of Infineon Technologies BTS716GBXUMA1 Power Switches ICs applications.
- Portable Video Game Players
- Portable GPS
- Handheld Devices
- Various applications equipped with buttons
- Wireless Modem Data Cards
- PDAs
- HDD and SSD
- USB Ports/Hubs
- Storage (HDDs, SSDs)
- Wearable Devices
