BTS736L2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | PROFET® |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 36mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3.8W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | BTS736L2 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 41A |
| Supply Voltage-Max (Vsup) | 41V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | On/Off |
| Current - Output (Max) | 4.4A |
| Nominal Supply Current | 1.6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 4.8A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.75V~43V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 7.3A |
| Rds On (Typ) | 36m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Width | 7.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS736L2 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This file is included in package 20-SOIC (0.295, 7.50mm Width).The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There are 2 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It belongs to the family BTS736L2.A total of 20 terminations can be found in it.The 20 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 2 functions.4.4AV is the maximum output of the LED driver.Maximum output current falls to 41A when operation criteria are met.Supply voltages of 12V allow for high efficiency.In this case, it is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 20 pins.Lighting drivers with 36mOhm resistance are used.This electrical component is part of the PROFET? series.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In this LED driver, the maximum supply voltage is configured to be 41V (Vsup).Normal operation requires Vsup above 4.75V.
BTS736L2 Features
Supplied from 12V
Resistance of 36mOhm
BTS736L2 Applications
There are a lot of Infineon Technologies BTS736L2 Power Switches ICs applications.
- Portable GPS Device
- Storage Drives
- Notebook PC
- Gaming
- HDD and SSD
- Wireless Modem Data Cards
- Smartphone and PDA
- Storage (HDDs, SSDs)
- Hot Swap
- USB Power Distribution
