BTS737S3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3.7W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | BTS737S3 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 5A |
| Nominal Supply Current | 1.6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 5.4A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~40V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 150 μs |
| Output Peak Current Limit-Nom | 11.1A |
| Rds On (Typ) | 30m Ω |
| Turn Off Time | 250 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 18.1mm |
| Width | 7.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS737S3 Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package 28-SOIC (0.295, 7.50mm Width).The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 4 outputs that can be used.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage of this LED driver is N-Channel volts.I believe it belongs to the BTS737S3 family.A total of 28 terminations have been recorded.For operation, 28 pins are used.It contains 4 functions.This LED driver has a maximum output of 5AV.Maximum output current falls to 45A when operation criteria are met.It is possible to achieve a high level of efficiency with a supply voltage of 12V.It is equipped with a total of 28 pins.The LED driver has 30mOhm resistance.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 5V.
BTS737S3 Features
Supplied from 12V
Resistance of 30mOhm
BTS737S3 Applications
There are a lot of Infineon Technologies BTS737S3 Power Switches ICs applications.
- Gaming
- Wireless/Networking Cards
- Storage Drives
- Hot Swap
- HDD and SSD
- PDAs
- USB Ports/Hubs
- HDD, SSD
- Various applications equipped with buttons
- Handheld Devices
