BTS7740GNUMA1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | TrilithIC™ |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Applications | DC Motors, General Purpose |
| HTS Code | 8542.39.00.01 |
| Technology | DMOS |
| Voltage - Supply | 1.8V~42V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Base Part Number | BTS7740 |
| Pin Count | 28 |
| Max Output Current | 8A |
| Supply Voltage-Max (Vsup) | 42V |
| Supply Voltage-Min (Vsup) | 3.2V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Voltage - Load | 1.8V~42V |
| Fault Protection | ESD, Over Temperature, Short Circuit, UVLO |
| Rds On (Typ) | 100m Ω LS, 110m Ω HS |
| Load Type | Inductive |
| Height Seated (Max) | 2.65mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
BTS7740GNUMA1 Overview
In order to package H bridge, Tape & Reel (TR) is used.H bridge is provided in the 28-SOIC (0.295, 7.50mm Width) package for the sake of cost savings.Based on the supply voltage of 1.8V~42V, improved reliabilbridge drivery can be ensured.H bridge circuit is mounted in the way of Surface Mount.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.Among H bridge motor drivers many uses, H bridge motor driver can be found in DC Motors, General Purpose as well.Mount the board using Surface Mount.Status Flag is one of full bridges specific characteristics.Transmission lines can be terminated with a termination that matches the characteristic impedance of the line using 28 terminations.As H bridge ic of the signal interface, 28 pins are used as pronged contacts.The base H bridge ic number of BTS7740 can be used to find related H bridge ics.H bridge circuit operates on a voltage of 12V.H bridge circuit incorporates BRUSH DC MOTOR CONTROLLER as its analog IC type.Basically, it is an electronic H-bridge that belongs to the TrilithIC? series.An ambient temperature of 8A determines the maximum load current that a power supply can deliver.It is made up of two 28 pins that work together to perform the specific functions of this bridge driver.
BTS7740GNUMA1 Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : BTS7740
BTS7740GNUMA1 Applications
There are a lot of Infineon Technologies BTS7740GNUMA1 Full Bridge Drivers, Half-Bridge Drivers applications.
- Voltage Regulators for CPUs
- Industrial Pumps
- VTR
- Industrial Fans
- Workstations
- CD players
- PC peripherals
- Networking Microprocessor Voltage Regulators
- Bipolar stepper motor
- Home Appliances
