BTS824R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerSOIC (0.433, 11.00mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3.6W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Base Part Number | BTS824 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 15A |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 3.7A |
| Nominal Supply Current | 4.8mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 4.7A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~40V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 250 μs |
| Output Peak Current Limit-Nom | 19A |
| Rds On (Typ) | 70m Ω |
| Turn Off Time | 270 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS824R Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the 20-PowerSOIC (0.433, 11.00mm Width) package.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 4 outputs in the lighting driver.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.It is equipped with Status Flag features.As you can see, it comes from the BTS824 family.It consists of 20 terminations in total.It is necessary to use the 20 pins in order to operate the LED driver.It consists of 2 functions.Its maximum output voltage is 3.7AV.To comply with the operation criteria, the maximum output current is reduced to 15A.It is possible to obtain high efficiency with a supply voltage of 12V.Surface Mount is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 20 pins.Currently, the LED driving board has a resistance of 70mOhm ohms.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 5.5V.12V is the power supply of the part.
BTS824R Features
Supplied from 12V
Resistance of 70mOhm
BTS824R Applications
There are a lot of Infineon Technologies BTS824R Power Switches ICs applications.
- HDD and SSD
- Storage Drives
- USB Protection
- Portable Video Game Players
- PDAs
- USB Power Distribution
- Smartphone and PDA
- HDD, SSD
- Telecom and Network Systems
- Smart Phones, Feature Phones
