BTS840S2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerSOIC (0.433, 11.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | PROFET® |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 27mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3.8W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | BTS840S2 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 50A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 11A |
| Nominal Supply Current | 1.2mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 12A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 150 μs |
| Output Peak Current Limit-Nom | 24A |
| Rds On (Typ) | 27m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS840S2 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 20-PowerSOIC (0.433, 11.00mm Width) package includes it.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver has 2 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the BTS840S2 family.A total of 20 terminations have been recorded.In order to operate, 20 pins are used.It is important to note that the LED driving board has 2 functions.There is a maximum output of 11AV from the LED driver.The maximum output current must drop to 50A to meet the operation criteria.Using a voltage of 12V allows for high efficiency.20 pins are equipped with it.It has a resistance of 27mOhm.This electrical component can be found in the PROFET? series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.Vsup (maximum supply voltage) is set to 34V.The supply voltage (Vsup) should be kept above 5V for normal operation.
BTS840S2 Features
Supplied from 12V
Resistance of 27mOhm
BTS840S2 Applications
There are a lot of Infineon Technologies BTS840S2 Power Switches ICs applications.
- Storage Drives
- HDD, SSD
- Solid-State Drives
- Smart Phones, Feature Phones
- USB Ports/Hubs
- Mobile Communication Devices
- Portable/Handheld Devices
- Set-Top Boxes
- Solid State Drivers
- Notebook PC
