Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) Exposed Pad |
Number of Pins |
14 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Last Time Buy |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Additional Feature |
ADDITIONAL EXTENDED OPERATING VOLTAGE 5 TO 48 V |
Max Power Dissipation |
1.6W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
28V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
9A |
Supply Voltage-Max (Vsup) |
36V |
Supply Voltage-Min (Vsup) |
8V |
Interface |
On/Off |
Nominal Supply Current |
2mA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Halogen Free |
Halogen Free |
Nominal Input Voltage |
28V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5V~36V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Output Peak Current Limit-Nom |
9A |
Rds On (Typ) |
10m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SINK |
Length |
8.65mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
BTT60101EKAXUMA1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It contains 14 terminations.The 14 pins are used to operate the LED driver.It has 1 functions.In order to meet the operation criteria, the maximum output current drops to 9A.High efficiency is possible at 28V supply voltage.Surface Mount is mounted in the way of this lighting driver.A maximum supply voltage of 36V is set in Vsup.A normal operation requires that the supply voltage (Vsup) remain above 8V.Using this LED driver, it is also possible to produce ADDITIONAL EXTENDED OPERATING VOLTAGE 5 TO 48 V.
BTT60101EKAXUMA1 Features
Supplied from 28V
Additional features like ADDITIONAL EXTENDED OPERATING VOLTAGE 5 TO 48 V
BTT60101EKAXUMA1 Applications
There are a lot of Infineon Technologies BTT60101EKAXUMA1 Power Switches ICs applications.
- Portable GPS Device
- Solid State Drivers
- Portable GPS
- Wireless/Networking Cards
- Wearable Devices
- Hot Swaps
- Solid-State Drives
- Notebook and Tablet Computers
- Low Voltage I/O System Power
- USB3.1 Power Delivery