BTT60101ERBXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, PROFET® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Additional Feature | ALSO HAS NOM SUPPLY FROM 8V TO 36V AND EXTENDED SUPPLY FROM 5V TO 48V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 9A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 10m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
BTT60101ERBXUMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 14-SOIC (0.154, 3.90mm Width) Exposed Pad package includes it.The LED driver is mounted as Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It has a total of 14 terminations.It has 1 functions.There is a maximum output of 9AV from the LED driver.The supply voltage of 28V is conducive to high efficiency.It is included in the Automotive, AEC-Q100, PROFET? series.The LED driver is configured with a maximum supply voltage of 36V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 5V.As well as producing ALSO HAS NOM SUPPLY FROM 8V TO 36V AND EXTENDED SUPPLY FROM 5V TO 48V, this LED driving board is capable of producing [1].
BTT60101ERBXUMA1 Features
Supplied from 28V
Additional features like ALSO HAS NOM SUPPLY FROM 8V TO 36V AND EXTENDED SUPPLY FROM 5V TO 48V
BTT60101ERBXUMA1 Applications
There are a lot of Infineon Technologies BTT60101ERBXUMA1 Power Switches ICs applications.
- Portable GPS Device
- Hard Disk Drives
- USB Protection
- Mobile Communication Devices
- USB Ports/Hubs
- Portable Devices
- Set-top-box
- Wearable Devices
- PC Card Hot Swap
- Storage Drives
