banner_page

BTT60201EKAXUMA1

N-Channel PMIC 14 Pin 14-SOIC (0.154, 3.90mm Width) Exposed Pad


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-BTT60201EKAXUMA1
  • Package: 14-SOIC (0.154, 3.90mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 213
  • Description: N-Channel PMIC 14 Pin 14-SOIC (0.154, 3.90mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width) Exposed Pad
Number of Pins 14
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2013
JESD-609 Code e3
Part Status Last Time Buy
Moisture Sensitivity Level (MSL) 3 (168 Hours)
ECCN Code EAR99
Resistance 40mOhm
Terminal Finish Tin (Sn)
Max Power Dissipation 1.6W
Peak Reflow Temperature (Cel) NOT SPECIFIED
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Number of Outputs 1
Output Type N-Channel
Max Output Current 7A
Operating Supply Voltage 28V
Interface On/Off
Nominal Supply Current 9mA
Output Configuration High Side
Power Dissipation 1.6W
Output Current 7A
Voltage - Supply (Vcc/Vdd) Not Required
Turn On Delay Time 150 μs
Switch Type General Purpose
Halogen Free Halogen Free
Nominal Input Voltage 28V
Turn-Off Delay Time 150 μs
Ratio - Input:Output 1:1
Voltage - Load 5V~36V
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO
Rds On (Typ) 20m Ω
Max Junction Temperature (Tj) 150°C
Height 1.7mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

BTT60201EKAXUMA1 Overview


It is package in Tape & Reel (TR) case.It is included with the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package as well.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.During operation, the 14 pins are used.To meet the operation criteria, the maximum output current drops to 7A.The LED driving board is mounted in the way of Surface Mount.40mOhm is the resistance of the lighting driver.In this case, the output current is set to 7A.When using this LED driving board, it is recommended that the supply voltage is set to 28V.

BTT60201EKAXUMA1 Features


Resistance of 40mOhm

BTT60201EKAXUMA1 Applications


There are a lot of Infineon Technologies BTT60201EKAXUMA1 Power Switches ICs applications.

  • Hot Swap
  • Portable GPS
  • Storage Drives
  • Wireless Modem Data Cards
  • USB Power Distribution
  • Gaming
  • Solid-State Drives
  • Hard Disk Drives
  • PC Cards
  • Storage (HDDs, SSDs)

Write a review

Note: HTML is not translated!
    Bad           Good