banner_page

BTT60301EKAXUMA1

N-Channel PMIC 14 Pin 14-SOIC (0.154, 3.90mm Width) Exposed Pad


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-BTT60301EKAXUMA1
  • Package: 14-SOIC (0.154, 3.90mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 720
  • Description: N-Channel PMIC 14 Pin 14-SOIC (0.154, 3.90mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width) Exposed Pad
Number of Pins 14
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2013
JESD-609 Code e3
Part Status Last Time Buy
Moisture Sensitivity Level (MSL) 3 (168 Hours)
ECCN Code EAR99
Resistance 62mOhm
Terminal Finish Tin (Sn)
Max Power Dissipation 1.6W
Peak Reflow Temperature (Cel) NOT SPECIFIED
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Number of Outputs 1
Output Type N-Channel
Max Output Current 6A
Operating Supply Voltage 28V
Interface On/Off
Nominal Supply Current 4.8mA
Output Configuration High Side
Power Dissipation 1.6W
Output Current 6A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 150 μs
Switch Type General Purpose
Halogen Free Halogen Free
Nominal Input Voltage 28V
Turn-Off Delay Time 150 μs
Ratio - Input:Output 1:1
Voltage - Load 5V~36V
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Rds On (Typ) 31m Ω
RoHS Status ROHS3 Compliant
Lead Free Lead Free

BTT60301EKAXUMA1 Overview


Tape & Reel (TR) is the way it's packaged.This package is included in 14-SOIC (0.154, 3.90mm Width) Exposed Pad.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.The 14 pins are used to operate the LED driver.This results in the maximum output current dropping to 6A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.Lighting drivers with 62mOhm resistance are used.In this case, the output current will be set to 6A.In order to maximize efficiency, the supply voltage should be set at 28V.

BTT60301EKAXUMA1 Features


Resistance of 62mOhm

BTT60301EKAXUMA1 Applications


There are a lot of Infineon Technologies BTT60301EKAXUMA1 Power Switches ICs applications.

  • Hot-Swap Systems
  • Portable Video Game Players
  • Hot Swap
  • Notebook and Tablet Computers
  • Storage Drives
  • Portable/Handheld Devices
  • Portable GPS Device
  • Low Voltage I/O System Power
  • Wireless Headsets
  • Gaming

Write a review

Note: HTML is not translated!
    Bad           Good