banner_page

BTT60302ERAXUMA1

N-Channel PMIC Automotive, AEC-Q100, PROFET? Series 28V 14-SOIC (0.154, 3.90mm Width) Exposed Pad


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-BTT60302ERAXUMA1
  • Package: 14-SOIC (0.154, 3.90mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 952
  • Description: N-Channel PMIC Automotive, AEC-Q100, PROFET? Series 28V 14-SOIC (0.154, 3.90mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width) Exposed Pad
Surface Mount YES
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Series Automotive, AEC-Q100, PROFET®
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 14
Additional Feature ALSO HAS NOM SUPPLY FROM 8V TO 36V AND EXTENDED SUPPLY FROM 5V TO 48V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 2
Supply Voltage 28V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
JESD-30 Code R-PDSO-G14
Number of Outputs 2
Output Type N-Channel
Supply Voltage-Max (Vsup) 36V
Supply Voltage-Min (Vsup) 5V
Interface On/Off
Current - Output (Max) 4A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 5V~36V
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Turn On Time 150 µs
Output Peak Current Limit-Nom 4A
Rds On (Typ) 32m Ω
Turn Off Time 150 µs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Height Seated (Max) 1.15mm
Length 8.65mm
Width 3.9mm
RoHS Status ROHS3 Compliant

BTT60302ERAXUMA1 Overview


The LED driver's packaged as a Tape & Reel (TR).It's included in the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts.It has a total of 14 terminations.Currently, the lighting driver has a total of 2 functions.The maximum output of the LED driving board is 4AV.It is possible to achieve a high level of efficiency with a supply voltage of 28V.This electrical component can be found in the Automotive, AEC-Q100, PROFET? series.The maximum supply voltage is set to 36V.A normal operation requires that the supply voltage (Vsup) remain above 5V.As a result of using this lighting driver, ALSO HAS NOM SUPPLY FROM 8V TO 36V AND EXTENDED SUPPLY FROM 5V TO 48V can also be produced.

BTT60302ERAXUMA1 Features


Supplied from 28V
Additional features like ALSO HAS NOM SUPPLY FROM 8V TO 36V AND EXTENDED SUPPLY FROM 5V TO 48V

BTT60302ERAXUMA1 Applications


There are a lot of Infineon Technologies BTT60302ERAXUMA1 Power Switches ICs applications.

  • HDD and SSD
  • Telecom and Network Systems
  • Wireless/Networking Cards
  • USB Power Distribution
  • USB Ports/Hubs
  • USB3.1 Power Delivery
  • Storage Drives
  • Hot-Swap Systems
  • Handheld Devices
  • Portable/Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good