banner_page

BTT60501EKAXUMA1

N-Channel PMIC PROFET? Series 14 Pin 28V 14-SOIC (0.154, 3.90mm Width) Exposed Pad


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-BTT60501EKAXUMA1
  • Package: 14-SOIC (0.154, 3.90mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 961
  • Description: N-Channel PMIC PROFET? Series 14 Pin 28V 14-SOIC (0.154, 3.90mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width) Exposed Pad
Number of Pins 14
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2013
Series PROFET®
JESD-609 Code e3
Part Status Last Time Buy
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 14
ECCN Code EAR99
Resistance 100mOhm
Terminal Finish Tin (Sn)
Max Power Dissipation 1.6W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 28V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Number of Outputs 1
Output Type N-Channel
Max Output Current 4.5A
Operating Supply Voltage 28V
Supply Voltage-Max (Vsup) 36V
Interface On/Off
Nominal Supply Current 9mA
Output Configuration High Side
Power Dissipation 1.6W
Output Current 4.5A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 150 μs
Switch Type General Purpose
Halogen Free Halogen Free
Nominal Input Voltage 28V
Turn-Off Delay Time 150 μs
Ratio - Input:Output 1:1
Voltage - Load 5V~36V
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO
Output Peak Current Limit-Nom 4.5A
Rds On (Typ) 50m Ω
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Length 8.65mm
Width 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

BTT60501EKAXUMA1 Overview


It is packaged in the form of a Tape & Reel (TR).In the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package, it is included.This LED driving board is mounted using the mounting type Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.There are 14 terminations in it.In order to operate, 14 pins are used.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 4.5A.High efficiency is possible when the supply voltage is set to 28V.The LED driving board is mounted in the way of Surface Mount.100mOhm is the resistance of the lighting driver.Electrical components such as this are included in the PROFET? series.It is set to 4.5A in this case.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).In order to maximize efficiency, the supply voltage should be set at 28V.

BTT60501EKAXUMA1 Features


Supplied from 28V
Resistance of 100mOhm

BTT60501EKAXUMA1 Applications


There are a lot of Infineon Technologies BTT60501EKAXUMA1 Power Switches ICs applications.

  • Smart Phones, Feature Phones
  • Wireless Modem Data Cards
  • Notebook PC
  • Low Voltage I/O System Power
  • Hard Disk Drives
  • Smartphone and PDA
  • USB Power Distribution
  • PDAs
  • Telecom and Network Systems
  • Portable Devices

Write a review

Note: HTML is not translated!
    Bad           Good