BTT60502EKAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2.1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Operating Supply Voltage | 28V |
| Supply Voltage-Max (Vsup) | 48V |
| Interface | On/Off |
| Nominal Supply Current | 9mA |
| Output Configuration | High Side |
| Power Dissipation | 2.1W |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 150 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 28V |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 50m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.7mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTT60502EKAXUMA1 Overview
The LED driver's packaged as a Cut Tape (CT).It is included with the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package as well.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type that it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.By default, it is set to output 2.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It contains 14 terminations.For operation, we use the 14 pins.As far as functions are concerned, the lighting driver has 1.This results in the maximum output current dropping to 3A to meet the operation criteria.The supply voltage of 28V is conducive to high efficiency.Surface Mount is mounted in the way of this lighting driver.The LED driver has a total of 14 pins.100mOhm is the resistance of the lighting driver.This case has the output current set to 3A.Vsup (maximum supply voltage) is set to 48V.It is recommended to set the supply voltage to 28V for optimum efficiency.
BTT60502EKAXUMA1 Features
Supplied from 28V
Resistance of 100mOhm
BTT60502EKAXUMA1 Applications
There are a lot of Infineon Technologies BTT60502EKAXUMA1 Power Switches ICs applications.
- Smartphone and PDA
- Solid-State Drives
- Wireless Headsets
- Gaming
- Solid State Drivers
- USB Power Distribution
- Telecom and Network Systems
- Notebook and Tablet Computers
- USB Ports/Hubs
- Portable GPS Device
