Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) Exposed Pad |
Number of Pins |
14 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Last Time Buy |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
14 |
Terminal Finish |
Tin (Sn) |
Additional Feature |
ADDITIONAL EXTENDED OPERATING VOLTAGE 5 TO 48 V |
Max Power Dissipation |
1.8W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
28V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
2.2A |
Supply Voltage-Max (Vsup) |
36V |
Supply Voltage-Min (Vsup) |
8V |
Interface |
On/Off |
Nominal Supply Current |
4mA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Halogen Free |
Halogen Free |
Nominal Input Voltage |
28V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5V~36V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Screening Level |
AEC-Q100 |
Turn On Time |
150 μs |
Output Peak Current Limit-Nom |
2.2A |
Rds On (Typ) |
100m Ω |
Turn Off Time |
150 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SINK |
Height Seated (Max) |
1.7mm |
Length |
8.65mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
BTT61002EKAXUMA1 Overview
The package is in the form of a Tape & Reel (TR).It is included with the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package as well.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.There are 2 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.In total, there are 14 terminations.The 14 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.The maximum output current is reduced to 2.2A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 28V.As a result, it is mounted in the manner of Surface Mount.The maximum supply voltage for this lighting driver is set to 36V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 8V.ADDITIONAL EXTENDED OPERATING VOLTAGE 5 TO 48 V can also be produced by using this LED driver.
BTT61002EKAXUMA1 Features
Supplied from 28V
Additional features like ADDITIONAL EXTENDED OPERATING VOLTAGE 5 TO 48 V
BTT61002EKAXUMA1 Applications
There are a lot of Infineon Technologies BTT61002EKAXUMA1 Power Switches ICs applications.
- Set-Top Boxes
- Hard Disk Drives
- USB Protection
- Portable GPS
- Handheld Devices
- HDD, SSD
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Portable Music Players
- PC Cards