BTT62004EMAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.8W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output Voltage | 24V |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 28V |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Number of Drivers | 4 |
| Turn On Time | 150 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 200m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 150 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.7mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTT62004EMAXUMA1 Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 24-LSSOP (0.154, 3.90mm Width) Exposed Pad package.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.A total of 24 terminations have been found in it.It has 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.It is possible to obtain high efficiency with a supply voltage of 28V.It is mounted in the way of Surface Mount.In this case, the output current will be set to 1.5A.The maximum supply voltage for this lighting driver is set to 36V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 8V.4 drivers are available for the part.
BTT62004EMAXUMA1 Features
Supplied from 28V
BTT62004EMAXUMA1 Applications
There are a lot of Infineon Technologies BTT62004EMAXUMA1 Power Switches ICs applications.
- Portable GPS
- Hard Disk Drives
- Notebook and Tablet Computers
- Hot-Swap Systems
- Hot Swaps
- PDAs
- Telecom and Network Systems
- Storage Drives
- Mobile Communication Devices
- Hot Swap
