BTT62004ESAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, PROFET® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 28V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 150 µs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 200m Ω |
| Turn Off Time | 150 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.15mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
BTT62004ESAXUMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the 24-TSSOP (0.154, 3.90mm Width) Exposed Pad package.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.By default, it is set to output 4.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.A total of 24 terminations have been found in it.The LED driving board has a total of 4 functions.There is a maximum output of 1AV from the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 28V.A component of this type is included in the Automotive, AEC-Q100, PROFET? series.The maximum supply voltage is set to 36V.A normal operation requires that the supply voltage (Vsup) remain above 5V.
BTT62004ESAXUMA1 Features
Supplied from 28V
BTT62004ESAXUMA1 Applications
There are a lot of Infineon Technologies BTT62004ESAXUMA1 Power Switches ICs applications.
- Notebook and Tablet Computers
- Handheld Devices
- Portable GPS Device
- Various applications equipped with buttons
- PDAs
- USB Ports/Hubs
- Set-Top Boxes
- Storage Drives
- USB Power Distribution
- Hard Disk Drives
