BU1511KV2
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 144 |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | On/Off |
| Output Configuration | High Side |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 144 |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| JESD-609 Code | e2 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Terminal Finish | Tin/Copper (Sn/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Microprocessors |
BU1511KV2 Overview
Space-saving is achieved by supplying it in the SOT-23-6 package. It is adopted to package in the Cut Tape (CT) way. In order to prevent signal reflections from off the end of the transmission line, 144 terminations are used. Essentially, it is an electronic device with 144 pins. It is configured with 144 pins. Based on the Surface Mount technology, the module is mounted to a PCB. This electronic part is classified into the subcategory of Microprocessors. A voltage of 3.3V is required to operate the device. It supports a minimum supply voltage of 3V. 85°C is set as the maximum operating temperature to keep the system working normally. For normal operation, the operating temperature must be set at -40°C at least. Voltages above 3.6V are supported.
BU1511KV2 Features
Embedded in the SOT-23-6 package
BU1511KV2 Applications
There are a lot of ROHM Semiconductor BU1511KV2 CODECs Interface ICs applications.
- Speed measurement
- Automation
- Translating the decimal values to the binary
- Robotics vehicle with the metal detector
- Code conversion
- Automated Guided Vehicles (AGV)
- RF-based home automation system
- Linear measurement
- Rotating radar platforms
- Switching function
