BU4053BCFV-E2

SPDT 160Ohm DUAL Analog Switches BREAK-BEFORE-MAKE BU4053 16 Pins 300nA 5V 16-LSSOP (0.173, 4.40mm Width)

Manufacturer: ROHM Semiconductor
Nocochips NO: 687-BU4053BCFV-E2
Package: 16-LSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 338
Description: SPDT 160Ohm DUAL Analog Switches BREAK-BEFORE-MAKE BU4053 16 Pins 300nA 5V 16-LSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	160Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	620mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	10
Base Part Number	BU4053
Pin Count	16
Polarity	Non-Inverting
Power Supplies	5/15V
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	18V
Min Supply Voltage	3V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	15μA
Propagation Delay	15 ns
Turn On Delay Time	550 ns
Logic Function	Demultiplexer, Multiplexer
Supply Type	Single
Bandwidth	20MHz
Supply Current-Max (Isup)	0.015mA
Turn-Off Delay Time	550 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	1.5V
Multiplexer/Demultiplexer Circuit	2:1
Current - Leakage (IS(off)) (Max)	300nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	10Ohm
Switch Circuit	SPDT
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	3V~18V
Height Seated (Max)	1.25mm
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-LSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2008
JESD-609 Code	e2
Pbfree Code	yes

BU4053BCFV-E2 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-LSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. This electronic part offers high-quality output due to its 2 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. The electronic part body is injected with 16 pins. These analog multiplexers are built based on SPDT switching circuits. Circuits number 3 make up this analogue multiplexer. BU4053 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 160Ohm. Datasheets for 16 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 18V to the switch device in normal circumstances. A cost-effective Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 3V. This digital switch can be operated with a current of 15μA. This analog switch requires a voltage of 3V~18V to drain from a single voltage supply. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 9V. In the case of dual power supplies, you should connect at least 1.5V. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. It is possible to transfer data over a 20MHz-bandwidth.