banner_page

BU4821F-TR

2.4V4 Terminals 4-Pin BU48* Voltage supervisor1 Channels Min 700mV Max 7V


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BU4821F-TR
  • Package: 4-TSOP (0.049, 1.25mm Width)
  • Datasheet: PDF
  • Stock: 933
  • Description: 2.4V4 Terminals 4-Pin BU48* Voltage supervisor1 Channels Min 700mV Max 7V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-TSOP (0.049, 1.25mm Width)
Number of Pins 4
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2009
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Subcategory Power Management Circuits
Max Power Dissipation 400mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 2.4V
Base Part Number BU48*
Output Open Drain or Open Collector
Pin Count 4
Power Supplies 2.5/5V
Number of Channels 1
Max Supply Voltage 7V
Min Supply Voltage 700mV
Operating Supply Current 550nA
Max Supply Current 1.05μA
Adjustable Threshold NO
Quiescent Current 350nA
Accuracy 1 %
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 2.1V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 2.079V
Max Reset Threshold Voltage 2.121V
Threshold Voltage +2.1V
Undervoltage Threshold 2.079V
Overvoltage Threshold 2.121V
Length 2mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

BU4821F-TR Overview


There are 4 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tape & Reel (TR), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find 4-TSOP (0.049, 1.25mm Width) functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management conducts at a voltage of 2.4V. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. There are a total of 4 pins on power management. 4 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 700mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 7V volts in this IC management. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 550nA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to BU48*, the base PMIC number. It requires 2.5/5V watts of power to operate this voltage supervisor. Voltage supervisor can work with a supply temperature of 1.05μA at the most.

BU4821F-TR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4821F-TR Applications


There are a lot of ROHM Semiconductor BU4821F-TR Voltage Supervisors applications.

  • Precision measurement
  • Digitally controlled LDO regulators circuit
  • Detection of phase loss
  • Utility meter
  • Medical-specific isolation transformer
  • FPGA design
  • Unattended substation automation
  • Consumer electronics
  • emergency room
  • Computer applications

Write a review

Note: HTML is not translated!
    Bad           Good