BU4829FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 210mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Base Part Number | BU48* |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 550nA |
| Max Supply Current | 1.4μA |
| Adjustable Threshold | NO |
| Quiescent Current | 450nA |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.871V |
| Max Reset Threshold Voltage | 2.929V |
| Threshold Voltage | +2.9V |
| Undervoltage Threshold | 2.871V |
| Overvoltage Threshold | 2.929V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
BU4829FVE-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SOT-665 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a voltage supply of 2.4V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 5 pins. The pins of the power management system count 5. Supply voltage (Vsup) should be at least 700mV for this power management. The maximum supply voltage (Vsup) is not to exceed 7V volts in this IC management. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~125°C TA . As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 550nA. A similar IC managements number of the manufacturer can always be found by using BU48*, the base power ics number. The maximum supply temperature is 1.4μA.
BU4829FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4829FVE-TR Applications
There are a lot of ROHM Semiconductor BU4829FVE-TR Voltage Supervisors applications.
- Computer applications
- Important electronics for automotive protection
- Set top box
- Smart meter
- Power distribution systems of CCU
- Fire equipment power monitoring system
- Analog circuit
- Personal computers
- Stable power system
- Embedded computing
