banner_page

BU4834FVE-TR

2.4V5 Terminals 5-Pin BU4834 Voltage supervisor1 Channels Min 700mV Max 7V


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BU4834FVE-TR
  • Package: SOT-665
  • Datasheet: PDF
  • Stock: 372
  • Description: 2.4V5 Terminals 5-Pin BU4834 Voltage supervisor1 Channels Min 700mV Max 7V (Kg)

Details

Tags

Parameters
Reset Active High/Active Low
Voltage - Threshold 3.4V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 3.366V
Max Reset Threshold Voltage 3.434V
Threshold Voltage +3.4V
Undervoltage Threshold 3.366V
Overvoltage Threshold 3.434V
Height Seated (Max) 0.6mm
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-665
Number of Pins 5
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2009
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Subcategory Power Management Circuits
Max Power Dissipation 210mW
Technology CMOS
Terminal Position DUAL
Terminal Form FLAT
Number of Functions 1
Supply Voltage 2.4V
Base Part Number BU4834
Output Open Drain or Open Collector
Pin Count 5
Number of Channels 1
Max Supply Voltage 7V
Min Supply Voltage 700mV
Operating Supply Current 550nA
Max Supply Current 1.58μA
Adjustable Threshold NO
Quiescent Current 500nA
Accuracy 1 %
Watchdog Timer No

BU4834FVE-TR Overview


A total of 5 terminals are used to mount this power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes SOT-665 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. A supply voltage of 2.4V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 5 pins on IC management. Pin count of the power management is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a supply current of 550nA for the power management. To find similar IC managements from the manufacturer, you can always search by BU4834. The maximum supply temperature voltage supervisor can handle is 1.58μA.

BU4834FVE-TR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4834FVE-TR Applications


There are a lot of ROHM Semiconductor BU4834FVE-TR Voltage Supervisors applications.

  • Military communications
  • Radar
  • Important electronics for automotive protection
  • Personal computers
  • Power distribution systems of infant care room
  • Electronics installed in the vehicle
  • Medical-specific isolation transformer
  • Data storage applications
  • Cloud computing
  • Electrical fire monitoring system

Write a review

Note: HTML is not translated!
    Bad           Good