BU4846G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Base Part Number | BU48* |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 900mV |
| Operating Supply Current | 550nA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.6V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 4.554V |
| Max Reset Threshold Voltage | 4.646V |
| Threshold Voltage | +4.6V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
BU4846G-TR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. There is a voltage supply of 2.4V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 5. This power management system has 5 pins. Supply voltage (Vsup) should be at least 900mV for this power management. Voltage (Vsup) shouldn't exceed 7V volts in this PMIC. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. Supplied with a operating current of 550nA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using BU48*, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 1.75μA.
BU4846G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
550nA operating supply current
BU4846G-TR Applications
There are a lot of ROHM Semiconductor BU4846G-TR Voltage Supervisors applications.
- Power distribution systems of CCU
- Automotive power systems
- Automotive permanent magnet synchronous motors
- Medical-specific insulation monitor
- Telecommunications equipment
- Sensitive sensors
- FPGA design
- DC stabilized power supply module
- DSP
- Dash board
