banner_page

BU4914G-TR

2.4V5 Terminals 5-Pin BU4914 Voltage supervisor1 Channels Min 700mV Max 7V


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BU4914G-TR
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 614
  • Description: 2.4V5 Terminals 5-Pin BU4914 Voltage supervisor1 Channels Min 700mV Max 7V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2009
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Subcategory Power Management Circuits
Max Power Dissipation 540mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 2.4V
Base Part Number BU4914
Output Push-Pull, Totem Pole
Pin Count 5
Number of Channels 1
Max Supply Voltage 7V
Min Supply Voltage 700mV
Operating Supply Current 550nA
Max Supply Current 1.05μA
Adjustable Threshold NO
Quiescent Current 350nA
Accuracy 1 %
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 1.4V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 1.386V
Max Reset Threshold Voltage 1.414V
Threshold Voltage +1.4V
Undervoltage Threshold 1.386V
Overvoltage Threshold 1.414V
Length 2.9mm
RoHS Status ROHS3 Compliant

BU4914G-TR Overview


There are 5 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Manage ics operate at 2.4V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 5. Power managment ic pin count is 5. It is recommended that Vsup should not be less than 700mV for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 7V volts. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 550nA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to BU4914, which is the base power ics number. A maximum supply temperature of 1.05μA can be used.

BU4914G-TR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4914G-TR Applications


There are a lot of ROHM Semiconductor BU4914G-TR Voltage Supervisors applications.

  • Radar
  • Analog circuit
  • Low voltage/high power - AI, GPU
  • Insulation fault location system
  • Sensitive sensors
  • Electric heating appliances
  • Detection of phase loss
  • Microprocessor system
  • Display equipment
  • Embedded computing

Write a review

Note: HTML is not translated!
    Bad           Good