BU4926FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 210mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Base Part Number | BU4926 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 550nA |
| Max Supply Current | 1.23μA |
| Adjustable Threshold | NO |
| Quiescent Current | 400nA |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.6V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.574V |
| Max Reset Threshold Voltage | 2.626V |
| Threshold Voltage | +2.6V |
| Undervoltage Threshold | 2.574V |
| Overvoltage Threshold | 2.626V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
BU4926FVE-TR Overview
A total of 5 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find SOT-665 functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a voltage supply of 2.4V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. In total, it has 5 pins on IC management. 5 pins make up the power management. Supply voltage (Vsup) should be at least 700mV for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~125°C TA . When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 550nA supply current present in the power management. It is always advisable to use BU4926, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 1.23μA can be used with this power management.
BU4926FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4926FVE-TR Applications
There are a lot of ROHM Semiconductor BU4926FVE-TR Voltage Supervisors applications.
- Power communication system
- Kitchen appliances
- DC stabilized power supply module
- Efficient information transmission
- Computer applications
- Personal computers
- Radio
- Sensitive sensors
- Medical-specific isolation transformer
- Electrical fire monitoring system
