BU4926G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Base Part Number | BU49* |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 550nA |
| Nominal Supply Current | 250nA |
| Max Supply Current | 1.23μA |
| Adjustable Threshold | NO |
| Quiescent Current | 400nA |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.6V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.574V |
| Max Reset Threshold Voltage | 2.626V |
| Threshold Voltage | +2.6V |
| Undervoltage Threshold | 2.574V |
| Overvoltage Threshold | 2.626V |
| Length | 2.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BU4926G-TR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a voltage supply of 2.4V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 5 pins on power management. This power management system has 5 pins. There should be a minimum voltage supply (Vsup) of 700mV for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 550nA. You can always use BU49*, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 1.23μA at the most.
BU4926G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4926G-TR Applications
There are a lot of ROHM Semiconductor BU4926G-TR Voltage Supervisors applications.
- Stable power system
- Dash board
- Linux and server computing
- Automotive power systems
- Electronics installed in the vehicle
- Computer applications
- Medical-specific insulation monitor
- Detection of phase loss
- Network equipment
- Transformer load monitoring equipment
