banner_page

BU4928F-TR

2.4V4 Terminals 4-Pin BU4928 Voltage supervisor1 Channels Min 700mV Max 7V


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BU4928F-TR
  • Package: SC-82
  • Datasheet: PDF
  • Stock: 623
  • Description: 2.4V4 Terminals 4-Pin BU4928 Voltage supervisor1 Channels Min 700mV Max 7V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-82
Number of Pins 4
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2009
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Subcategory Power Management Circuits
Max Power Dissipation 400mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 2.4V
Base Part Number BU4928
Output Push-Pull, Totem Pole
Pin Count 4
Power Supplies 2.5/5V
Number of Channels 1
Max Supply Voltage 7V
Min Supply Voltage 700mV
Operating Supply Current 550nA
Max Supply Current 1.4μA
Adjustable Threshold NO
Quiescent Current 450nA
Accuracy 1 %
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 2.8V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 2.772V
Max Reset Threshold Voltage 2.828V
Threshold Voltage +2.8V
Undervoltage Threshold 2.772V
Overvoltage Threshold 2.828V
Length 2mm
RoHS Status ROHS3 Compliant

BU4928F-TR Overview


As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SC-82 functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In a 2.4V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 4 pins on power management. The pins of the power management system count 4. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 7V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. Supplied with a operating current of 550nA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using BU4928, the base power ics number. To be able to work, this power management requires 2.5/5V volts of power. At most, voltage supervisor can operate at a supply temperature of 1.4μA.

BU4928F-TR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4928F-TR Applications


There are a lot of ROHM Semiconductor BU4928F-TR Voltage Supervisors applications.

  • Leakage current detection
  • Unattended substation automation
  • Fire equipment power monitoring system
  • Battery cars
  • Military communications
  • Display equipment
  • Linux and server computing
  • External alarm
  • Electric heating appliances
  • Microprocessor system

Write a review

Note: HTML is not translated!
    Bad           Good