BU4930FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 210mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Base Part Number | BU49* |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 550nA |
| Max Supply Current | 1.4μA |
| Adjustable Threshold | NO |
| Quiescent Current | 450nA |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.97V |
| Max Reset Threshold Voltage | 3.03V |
| Threshold Voltage | +3V |
| Undervoltage Threshold | 2.97V |
| Overvoltage Threshold | 3.03V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
BU4930FVE-TR Overview
A total of 5 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. Please find attached SOT-665 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management conducts in a 2.4V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. A total of 5 pins are located on this power management. Power managment ic pin count is 5. It is recommended that Vsup should not be less than 700mV for this IC power. Voltage (Vsup) shouldn't exceed 7V volts in this PMIC. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 550nA. A similar IC managements number of the manufacturer can always be found by using BU49*, the base power ics number. A maximum supply temperature of 1.4μA can be used.
BU4930FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4930FVE-TR Applications
There are a lot of ROHM Semiconductor BU4930FVE-TR Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Important electronics for automotive safety
- Radar
- Unattended substation automation
- Leakage protection
- Important electronics for automotive protection
- Magnetic resonance imaging
- Stable power system
- Radio
- Detection of phase loss
