BU4932FVE-TR
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 550nA |
| Max Supply Current | 1.4μA |
| Adjustable Threshold | NO |
| Quiescent Current | 450nA |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.2V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 3.168V |
| Max Reset Threshold Voltage | 3.232V |
| Threshold Voltage | +3.2V |
| Undervoltage Threshold | 3.168V |
| Overvoltage Threshold | 3.232V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 210mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Base Part Number | BU4932 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
BU4932FVE-TR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SOT-665 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. A supply voltage of 2.4V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 5. There are 5 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 700mV volts. Voltage (Vsup) shouldn't exceed 7V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~125°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 550nA, this PMIC is capable of fully function as specified. You can always use BU4932, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.4μA.
BU4932FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4932FVE-TR Applications
There are a lot of ROHM Semiconductor BU4932FVE-TR Voltage Supervisors applications.
- Detection of phase loss
- Transformer load monitoring equipment
- Household appliances
- Important electronics for automotive protection
- Military electronics
- Military communications
- Automotive permanent magnet synchronous motors
- Analog circuit
- Functional modules
- Network equipment
