banner_page

BU4941G-TR

2.4V5 Terminals 5-Pin BU4941 Voltage supervisor1 Channels Min 700mV Max 7V


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BU4941G-TR
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 165
  • Description: 2.4V5 Terminals 5-Pin BU4941 Voltage supervisor1 Channels Min 700mV Max 7V (Kg)

Details

Tags

Parameters
Overvoltage Threshold 4.141V
Length 2.9mm
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2009
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Subcategory Power Management Circuits
Max Power Dissipation 540mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 2.4V
Base Part Number BU4941
Output Push-Pull, Totem Pole
Pin Count 5
Number of Channels 1
Max Supply Voltage 7V
Min Supply Voltage 700mV
Operating Supply Current 550nA
Max Supply Current 1.58μA
Adjustable Threshold NO
Quiescent Current 500nA
Accuracy 1 %
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 4.1V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 4.059V
Max Reset Threshold Voltage 4.141V
Threshold Voltage +4.1V
Undervoltage Threshold 4.059V

BU4941G-TR Overview


There are 5 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In a 2.4V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. There are 5 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supply current of the power management is 550nA. To find similar IC managements from the manufacturer, you can always search by BU4941. A maximum supply temperature of 1.58μA can be used.

BU4941G-TR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4941G-TR Applications


There are a lot of ROHM Semiconductor BU4941G-TR Voltage Supervisors applications.

  • Important electronics for automotive safety
  • Power distribution systems of ICU
  • Consumer electronics
  • Personal computers
  • Power communication system
  • Display equipment
  • DSP
  • Rechargeable batteries
  • Military electronics
  • Medical-specific insulation monitor

Write a review

Note: HTML is not translated!
    Bad           Good