BU7231SG-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | BU7231 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 2.75V |
| Number of Elements | 1 |
| Power Supplies | 3V |
| Nominal Supply Current | 5μA |
| Power Dissipation | 540W |
| Output Current | 6mA |
| Propagation Delay | 1.7 μs |
| Quiescent Current | 15μA |
| Response Time | 50 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 11mV |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 15μA |
| Voltage - Input Offset (Max) | 11mV @ 3V |
| Current - Input Bias (Max) | 1pA @ 3V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 6mA @ 3V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BU7231SG-TR Overview
The product is packaged in SC-74A, SOT-753 in order to facilitate transportation.The comparator has an output type of Push-Pull .This device is designed in Tape & Reel (TR) case.The comparator has 5 terminals.The chip belongs to Comparator .With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical General Purpose .The total number of elements is 1 .A total of 5 pins are included.Electronic comparator is recommended to mount using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~105°C to prevent malfunctions.The comparator is equipped with 5 pins.In case you are looking for more pin-to-pin solutions, you may want to search BU7231 .The comparator displays a quiescent current of 15μA .The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 5μA .In order to run the device, there are only 3V power supplies required.Electronic comparator is possible to input up to 1pA current into the device.Based on the voltage formula, the voltage gain of the part is 90dB .The normal operation of the system requires 2.75V operating voltage.
BU7231SG-TR Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 15μA
Voltage Gain: 90dB
BU7231SG-TR Applications
There are a lot of ROHM Semiconductor BU7231SG-TR linear comparators applications.
- Battery-Powered Electronics
- Battery management and protection
- Ultra-Low Power Systems
- Notebooks and PDAs
- Set Top Boxes
- General-Purpose Portable Devices
- Infotainment and Clusters
- DC/DC and AC/DC power supplies
- Mobile Phones
- Laptop Computers
