BU7232F-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | BU7232 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 2.75V |
| Number of Elements | 2 |
| Power Supplies | 3V |
| Nominal Supply Current | 10μA |
| Power Dissipation | 550W |
| Output Current | 6mA |
| Propagation Delay | 1.7 μs |
| Quiescent Current | 25μA |
| Response Time | 50 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 11mV |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 25μA |
| Voltage - Input Offset (Max) | 11mV @ 3V |
| Current - Input Bias (Max) | 1pA @ 3V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 6mA @ 3V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BU7232F-E2 Overview
For convenience, it is packaged in 8-SOIC (0.173, 4.40mm Width) .The comparator has a Push-Pull output.Ready for shipping in Tape & Reel (TR) package.You can find 8 terminals of the comparator.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.It's a typical General Purpose comparator.The total number of elements is 2 .There are 8 pins on this board.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator is equipped with 8 pins.If you require more pin-to-pin solutions, search BU7232 for more options.In this comparator, the quiescent current is 25μA .The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires 10μA supply current.A power supply of 3V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum current of 1pA into the device.From the voltage formula, the voltage gain of the part is 90dB .The operating supply voltage for normal operation should be 2.75V .
BU7232F-E2 Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 25μA
Voltage Gain: 90dB
BU7232F-E2 Applications
There are a lot of ROHM Semiconductor BU7232F-E2 linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Alarm and Monitoring Circuits
- High-Speed Differential Line Receiver
- Zero-Crossing Detectors
- General Purpose Low Voltage Applications
- Power management
- Portable and Battery-Powered Systems
- Mobile Phones and Tablets
- Window Comparators
- Building automation
