BU7232FVM-TR
| Parameters | |
|---|---|
| Number of Elements | 2 |
| Power Supplies | 3V |
| Nominal Supply Current | 10μA |
| Output Current | 6mA |
| Propagation Delay | 1.7 μs |
| Quiescent Current | 25μA |
| Response Time | 50 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 11mV |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 25μA |
| Voltage - Input Offset (Max) | 11mV @ 3V |
| Current - Input Bias (Max) | 1pA @ 3V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 6mA @ 3V |
| Height Seated (Max) | 0.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BU7232 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 2.75V |
BU7232FVM-TR Overview
For convenience, it is packaged in 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) .Output type of this comparator is Push-Pull .As a result, it is designed with Tape & Reel (TR) package.Electronic comparator is possible to find the 8 terminals of the comparator.Other Comparator like the device play a important role in the industry.With a 3V voltage supply, the comparator can perform multiple demanding tasks.When it comes to types, this comparator is a typical General Purpose .Currently, it consists of only 2 elements.The device contains 8 pins.The recommended mounting method is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 8 pins on the comparator.You can search BU7232 if you are looking for more pin-to-pin solutions.A quiescent current of 25μA is displayed by this comparator.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 10μA .In order to run the device, there are only 3V power supplies required.Input current to the device is limited to 1pA .Based on the voltage formula, the voltage gain of the part is 90dB .The operating supply voltage for normal operation should be 2.75V .
BU7232FVM-TR Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 25μA
Voltage Gain: 90dB
BU7232FVM-TR Applications
There are a lot of ROHM Semiconductor BU7232FVM-TR linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Automotive
- Pulse, Squarewave, and Time Delay Generators
- Lithium ion battery monitoring
- System control and monitoring
- General-Purpose Portable Devices
- Current and voltage sensing
- Set Top Boxes
- Zero-Crossing Detectors
- Industrial
