BU7232SF-E2
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | BU7232 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 2.75V |
| Number of Elements | 2 |
| Power Supplies | 3V |
| Nominal Supply Current | 10μA |
| Output Current | 6mA |
| Propagation Delay | 1.7 μs |
| Quiescent Current | 25μA |
| Response Time | 50 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 11mV |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 25μA |
| Voltage - Input Offset (Max) | 11mV @ 3V |
| Current - Input Bias (Max) | 1pA @ 3V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 6mA @ 3V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
BU7232SF-E2 Overview
The product is packaged in 8-SOIC (0.173, 4.40mm Width) in order to facilitate transportation.A comparator with a Push-Pull output is used here.The chip is packaged with Tape & Reel (TR) .There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a General Purpose chip.Electronic comparator consists of 2 elements in total.There are 8 pins on this board.The recommended mounting type is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~105°C .8 pins are available on the comparator.You can search BU7232 if you are looking for more pin-to-pin solutions.There is a quiescent current of 25μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires 10μA supply current.The device can be operated with 3V power supplies.Electronic comparator is possible to input up to 1pA current into the device.The voltage formula shows that the part has a voltage gain of 90dB .The operating supply voltage for normal operation should be 2.75V .
BU7232SF-E2 Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~105°C
Quiescent Current: 25μA
Voltage Gain: 90dB
BU7232SF-E2 Applications
There are a lot of ROHM Semiconductor BU7232SF-E2 linear comparators applications.
- Building automation
- Mobile Phones and Tablets
- Power Supervision
- Hand-Held Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Infotainment and Clusters
- Factory automation & control
- Set Top Boxes
- General-Purpose Portable Devices
- Portable Battery Monitoring
