banner_page

BU7232SFVM-TR

Surface Mount Tape & Reel (TR) 6mA mA 50 ns μs Linear Comparators 90dB dB 1pA pA 2007 10μA μA 11mV mV Surface Mount


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BU7232SFVM-TR
  • Package: 8-VSSOP, 8-MSOP (0.110, 2.80mm Width)
  • Datasheet: -
  • Stock: 952
  • Description: Surface Mount Tape & Reel (TR) 6mA mA 50 ns μs Linear Comparators 90dB dB 1pA pA 2007 10μA μA 11mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Copper, Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-VSSOP, 8-MSOP (0.110, 2.80mm Width)
Number of Pins 8
Operating Temperature -40°C~105°C
Packaging Tape & Reel (TR)
Published 2007
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination SMD/SMT
ECCN Code EAR99
Type General Purpose
Subcategory Comparator
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 3V
Terminal Pitch 0.65mm
Base Part Number BU7232
Pin Count 8
Output Type Push-Pull
Operating Supply Voltage 2.75V
Number of Elements 2
Power Supplies 3V
Nominal Supply Current 10μA
Power Dissipation 470W
Output Current 6mA
Propagation Delay 1.7 μs
Quiescent Current 25μA
Response Time 50 ns
Common Mode Rejection Ratio 80 dB
Voltage - Supply, Single/Dual (±) 1.8V~5.5V ±0.9V~2.75V
Input Offset Voltage (Vos) 11mV
Voltage Gain 90dB
Power Supply Rejection Ratio (PSRR) 80dB
Supply Voltage Limit-Max 7V
Max Input Current 1pA
Input Bias Current 1pA
Current - Quiescent (Max) 25μA
Voltage - Input Offset (Max) 11mV @ 3V
Current - Input Bias (Max) 1pA @ 3V
CMRR, PSRR (Typ) 80dB CMRR, 80dB PSRR
Current - Output (Typ) 6mA @ 3V
Height Seated (Max) 0.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

BU7232SFVM-TR Overview


To facilitate transportation, it comes packaged in 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) .This comparator is of the Push-Pull output type.The chip is packaged with Tape & Reel (TR) .8 terminals are found on the comparator.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Electronic comparator can be classified as a General Purpose chip.Electronic comparator has a total of 2 elements.Electronic comparator has 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~105°C to prevent malfunctions.Electronic comparator has 8 pins.If you require more pin-to-pin solutions, search BU7232 for more options.There is a quiescent current of 25μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires a nominal supply current of 10μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 3V power supplies.Input current to the device is limited to 1pA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 90dB .A normal operation requires a voltage of 2.75V .

BU7232SFVM-TR Features


Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~105°C
Quiescent Current: 25μA
Voltage Gain: 90dB

BU7232SFVM-TR Applications


There are a lot of ROHM Semiconductor BU7232SFVM-TR linear comparators applications.

  • Set Top Boxes
  • Point of load regulators
  • High-Speed Differential Line Receiver
  • Infotainment and Clusters
  • Current and voltage sensing
  • Factory automation & control
  • Hand-Held Electronics
  • Wireless Base Stations
  • Motor drives
  • Handheld Instruments

Write a review

Note: HTML is not translated!
    Bad           Good