BU7241SG-TR
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | BU7241 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 2.75V |
| Number of Channels | 1 |
| Operating Supply Current | 70μA |
| Nominal Supply Current | 150μA |
| Output Current | 10mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 45 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 9mV |
| Bandwidth | 900 kHz |
| Unity Gain BW-Nom | 900 kHz |
| Voltage Gain | 95dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | YES |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
BU7241SG-TR Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 5 terminations over the past year. The pins on this board total to 5 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. Instrumentation amplifier is a part of Operational Amplifier. An 5-pin op amp ic is included in the package. There is an input offset voltage of 9mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~105°C for optimal performance. Using a supply current of 70μA , this buffer op amp will be able to operate. Maintain 95dB as the voltage gain. Instrumentation amplifier has 1 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 2.75V. The instrumentation amplifier is packed in the form of TAPE AND REEL.
BU7241SG-TR Features
5 Pins
supply voltage of 3V
95dB voltage gain
Output Type: Rail-to-Rail
BU7241SG-TR Applications
There are a lot of ROHM Semiconductor BU7241SG-TR Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Test equipment
- Power transmission
- Video amplifiers
- High input resistance broadband
- Integrator circuits
- Weak signal detection
- Semiconductor detectors
- Television broadcasting equipment
- Signal transformation
