BU7251G-TR
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | BU7251 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 2.75V |
| Number of Elements | 1 |
| Power Supplies | 3V |
| Nominal Supply Current | 15μA |
| Output Current | 6mA |
| Propagation Delay | 550 ns |
| Quiescent Current | 35μA |
| Response Time | 50 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 11mV |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 35μA |
| Voltage - Input Offset (Max) | 11mV @ 3V |
| Current - Input Bias (Max) | 1pA @ 3V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 6mA @ 3V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
BU7251G-TR Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .There is a Push-Pull output type for this comparator.This chip is designed with the Tape & Reel (TR) package.There are 5 terminals on the comparator.Electronic comparator is a part of Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .In general, the chip type can be classified as General Purpose .Electronic comparator has a total of 1 elements.The device includes 5 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .There are 5 pins on the comparator.You may wish to search BU7251 for more solutions that address your specific needs.In this comparator, the quiescent current is 35μA .The board has a Surface Mount for mounting on a PCB or any other board.For normal use of the device, the nominal supply current should be 15μA .A power supply of 3V is sufficient for the operation of the device.Input current to the device is limited to 1pA .Comparator electronics follows that the voltage gain of the part is 90dB .In order to operate normally, a supply voltage of 0 is required.
BU7251G-TR Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 35μA
Voltage Gain: 90dB
BU7251G-TR Applications
There are a lot of ROHM Semiconductor BU7251G-TR linear comparators applications.
- Point of load regulators
- General-Purpose, Low-Voltage Applications
- Industrial
- Automatic Test Equipment
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- System control and monitoring
- Appliances
- Multivibrators and High-Voltage Digital Logic Gates
- Metering Systems
