BU7252FVM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BU7252 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 2.75V |
| Number of Elements | 2 |
| Power Supplies | 3V |
| Nominal Supply Current | 35μA |
| Output Current | 6mA |
| Propagation Delay | 550 ns |
| Quiescent Current | 65μA |
| Response Time | 50 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 11mV |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 11mV @ 3V |
| Current - Input Bias (Max) | 1pA @ 3V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 6mA @ 3V |
| Height Seated (Max) | 0.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BU7252FVM-TR Overview
For convenience, it is packaged in 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) .The comparator has a Push-Pull output.Ready for shipping in Tape & Reel (TR) package.You can find 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.Electronic comparator can be classified as a General Purpose chip.Currently, it consists of only 2 elements.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.8 pins are available on the comparator.Alternatively, you may search for BU7252 to find more pin-to-pin solutions for your specific needs.As a result, this comparator displays a quiescent current of 65μA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current be 35μA in order to use the device normally.A power supply of 3V is sufficient for the operation of the device.You are allowed to input a maximum current of 1pA into the device.According to the voltage formula, the part has a voltage gain of 90dB .A normal operation requires a voltage of 2.75V .
BU7252FVM-TR Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA
Voltage Gain: 90dB
BU7252FVM-TR Applications
There are a lot of ROHM Semiconductor BU7252FVM-TR linear comparators applications.
- Current and voltage sensing
- DC/DC and AC/DC power supplies
- Mobile Communications
- Industrial
- Point of load regulators
- Zero-Crossing Detectors
- Body Control Modules
- Self-diagnostics
- Analog front end
- Power management
