BU7252SF-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | BU7252 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 2.75V |
| Number of Elements | 2 |
| Power Supplies | 3V |
| Nominal Supply Current | 35μA |
| Output Current | 6mA |
| Propagation Delay | 550 ns |
| Quiescent Current | 65μA |
| Response Time | 50 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 11mV |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 11mV @ 3V |
| Current - Input Bias (Max) | 1pA @ 3V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 6mA @ 3V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BU7252SF-E2 Overview
The product is packaged in 8-SOIC (0.173, 4.40mm Width) in order to facilitate transportation.The comparator has a type Push-Pull output.Ready for shipping in Tape & Reel (TR) package.The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Speaking of types, this is a typical General Purpose comparator.A total of 2 elements can be found in it.The device is equipped with 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~105°C .Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching BU7252 .This comparator presents a quiescent current of 65μA .There is a Surface Mount for mounting it on a PCB or other board.The nominal supply current of the device should be 35μA for normal use.The device can be operated with 3V power supplies.Electronic comparator is possible to input a maximum current of 1pA into the device.The voltage gain of the part is indicated by 90dB in the voltage formula.Comparator electronics is necessary to have an operating supply voltage of 2.75V for normal operation.
BU7252SF-E2 Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~105°C
Quiescent Current: 65μA
Voltage Gain: 90dB
BU7252SF-E2 Applications
There are a lot of ROHM Semiconductor BU7252SF-E2 linear comparators applications.
- Battery-Powered Electronics
- General-Purpose Portable Devices
- Industrial
- General Purpose Low Voltage Applications
- Handheld Instruments
- Multivibrators and High-Voltage Digital Logic Gates
- Power management
- Wearable Devices
- Battery-Powered Electronics
- Mobile Communications
