BUF11702PWPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 118.501007mg |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Applications | TFT-LCD Panels: Gamma Buffer, VCOM Driver |
| HTS Code | 8542.33.00.01 |
| Subcategory | Buffer Amplifier |
| Max Power Dissipation | 3.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BUF11702 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 10 |
| Temperature Grade | COMMERCIAL |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 3.7mA |
| Power Dissipation | 3.5W |
| Output Current | 150mA |
| Slew Rate | 1V/μs |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V |
| Input Offset Voltage (Vos) | 12mV |
| Voltage Gain | 0.004dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Supply Voltage Limit-Max | 16.5V |
| -3db Bandwidth | 1MHz |
| Input Bias Current | 1pA |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BUF11702PWPR Overview
A Tape & Reel (TR) package contains class d amplifier.The 28-PowerTSSOP (0.173, 4.40mm Width) package contains class d amp, in order to reduce space consumption.This is a good choice for TFT-LCD Panels: Gamma Buffer, VCOM Driver because of audio amplifiers high performance.A Surface Mount mounting method is used to connect audio power amplifier to the PCB.Audio amp can be located by using BUF11702 as the base part number.There are 28 pins on audio digital amplifier.There are 28 terminations in digital amplifier.Its -3db bandwidth is 1MHz.I have included this audio power amplifier in Buffer Amplifier.A supply current of 2.5mA is required to operate the amplifier.In this case, there are 28 pins used in amplifier ics construction.Temperatures less than 85°C are recommended for operation.Operating temperatures should not fall below 0°C.In order to achieve high efficiency, the supply voltage is set to 10V.The mounting method used is Surface Mount.There is 150mA output current in this scenario.There is a voltage gain of 0.004dB on the audio amplifier ic.In total, 10 elements are present.
BUF11702PWPR Features
Buffer Amplifier subcategory
28 pins
BUF11702PWPR Applications
There are a lot of Texas Instruments BUF11702PWPR Video Amps and Modules applications.
- Automotive active noise cancellation
- Body Control Modules
- Automotive
- Preamplification and Filtering
- Car Audio
- Set-Top Box
- Audio Test And Measurement
- Telematics control unit
- Analog and Digital Mixing Consoles
- Analog and Digital Mixing Consoles
