BUF11704AIPWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 118.501007mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Applications | TFT-LCD Panels: Gamma Buffer, VCOM Driver |
| HTS Code | 8542.33.00.01 |
| Subcategory | Buffer Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 3.58W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 10 |
| Supply Voltage | 18V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BUF11704 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Temperature Grade | OTHER |
| Number of Circuits | 10 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 9mA |
| Output Current | 100mA |
| Slew Rate | 1.6V/μs |
| Voltage - Supply, Single/Dual (±) | 4.5V~18V |
| Input Offset Voltage (Vos) | 30mV |
| Voltage Gain | 0.004dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Supply Voltage Limit-Max | 19V |
| -3db Bandwidth | 1MHz |
| Input Bias Current | 1pA |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BUF11704AIPWPR Overview
Class d amplifier's packaged in the form of a Tape & Reel (TR).28-PowerTSSOP (0.173, 4.40mm Width) package reduces space by making class d amp available.This amplifier lends itself well to TFT-LCD Panels: Gamma Buffer, VCOM Driver because of its high performance.audio power amplifier is mounted on the PCB based on the method of Surface Mount.Audio ic's enhanced flexibility is achieved with the usage of 10 circuits.In order to find audio amp, use its base part number BUF11704.The number of pins is 28.A total of 28 terminations are present.Its -3db bandwidth is 1MHz.The audio power amplifier is included in Buffer Amplifier.Audio amplifier is powered by 5mA supply current.The board is constructed using 28 pins.In order to operate properly, the temperature must be below 85°C.The operating temperature should be at least -25°C.Using 18V supply voltage results in high efficiency.It is mounted using Surface Mount.A 100mA output current is used in this scenario.The audio amplifier ic gains a voltage of 0.004dB.
BUF11704AIPWPR Features
Buffer Amplifier subcategory
28 pins
BUF11704AIPWPR Applications
There are a lot of Texas Instruments BUF11704AIPWPR Video Amps and Modules applications.
- Aftermarket telematics
- External Audio Amplifiers
- Car Audio
- High-End A/V Receivers
- Emergency call (eCall)
- Microphone Preamplifiers
- Microphone Preamplifier Circuit
- Analog and Digital Mixing Consoles
- Audio Test and Measurement
- Premium Audio
