BUF634F/500
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Weight | 1.45589g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | BUF634 |
| Pin Count | 4 |
| Number of Channels | 1 |
| Nominal Supply Current | 20mA |
| Output Current | 250mA |
| Current - Supply | 15mA |
| Slew Rate | 2000V/μs |
| Amplifier Type | Buffer |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Input Offset Voltage (Vos) | 100mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 0.087dB |
| Average Bias Current-Max (IIB) | 20μA |
| Voltage - Input Offset | 30mV |
| Current - Output / Channel | 250mA |
| -3db Bandwidth | 180MHz |
| Bias Current-Max (IIB) @25C | 20μA |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BUF634F/500 Overview
The linear amplifier is packaged in a TO-263-6, D2Pak (5 Leads + Tab), TO-263BA case which makes it easy for the consumer to handle. An op amp ic of the Buffer type. Linear amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. A total of 4 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 5-pin op amp ic is included in the package. The input offset voltage is 100mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . 0.087dB should be the voltage gain. On the buffer amps, there are 1 channels that can be used. It is used TR to pack the op amps. A supply of 15mA or higher is recommended for use with this electronic part.
BUF634F/500 Features
4 Pins
supply voltage of 15V
0.087dB voltage gain
BUF634F/500 Applications
There are a lot of Texas Instruments BUF634F/500 Instrumentational OP Amps applications.
- Digital cameras
- Video data acquisition
- Division circuits
- Commercial audio systems
- Thermocouples
- Navigation
- Integrator circuits
- Signal operation
- Medical imaging
- Radar
