Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
BUF634 |
Pin Count |
4 |
Number of Channels |
1 |
Operating Supply Current |
15mA |
Nominal Supply Current |
20mA |
Output Current |
250mA |
Slew Rate |
2000V/μs |
Amplifier Type |
Buffer |
Current - Input Bias |
5μA |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±2.25V~18V |
Output Current per Channel |
250mA |
Input Offset Voltage (Vos) |
30mV |
Bandwidth |
180MHz |
Gain Bandwidth Product |
180MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Voltage Gain |
0.087dB |
Average Bias Current-Max (IIB) |
20μA |
-3db Bandwidth |
180MHz |
Bias Current-Max (IIB) @25C |
20μA |
Dual Supply Voltage |
9V |
Max Junction Temperature (Tj) |
150°C |
Ambient Temperature Range High |
85°C |
Height |
4.83mm |
Length |
10.16mm |
Width |
8.42mm |
Thickness |
4.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Lifecycle Status |
NRND (Last Updated: 2 days ago) |
Contact Plating |
Tin |
BUF634FKTTT Overview
Packaging for the buffer amplifier is in the form of a TO-263-6, D2Pak (5 Leads + Tab), TO-263BA case. Buffer amps of this type are called Buffer-types. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. There have been a total of 5 terminations over the past year. The pins on this board total to 4 in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. In total, the buffer amplifier consists of 5 pins. Regarding input offset voltage, op amp rates 30mV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 15mA, this op amp ic can operate. There should be no change in the voltage gain at 0.087dB. There are a total of 1 channels available on the op amps. For the packing of the instrumentation amplifier, TR is adopted.
BUF634FKTTT Features
4 Pins
supply voltage of 15V
0.087dB voltage gain
BUF634FKTTT Applications
There are a lot of Texas Instruments BUF634FKTTT Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Ultrasound transducers
- Broadcasting
- Switching amplifier
- Vehicle electronics
- Digital cameras
- Comparator
- Gaming industry
- Proportional operation circuits
- E-book readers