BUK209-50Y,127
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Surface Mount | NO |
| Operating Temperature | 150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Series | TOPFET™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BUK2 |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 35V |
| Power Supplies | 5.5/35V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 6A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 70 μs |
| Output Peak Current Limit-Nom | 6A |
| Rds On (Typ) | 45m Ω |
| Turn Off Time | 80 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| RoHS Status | ROHS3 Compliant |
BUK209-50Y,127 Overview
A Tube is used to package it.This file is included in package TO-220-5 Formed Leads.It has been mounted as Through Hole on the LED driver.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to 150°C TJ.The lighting driver is equipped with 1 outputs that can be used.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Status Flag features.It belongs to the family BUK2.A total of 5 terminations have been recorded.There are 1 functions of the LED driver.From the lighting driver, there is a maximum output of 6AV.The supply voltage can be 13V for high efficiency.The LED driving board is equipped with a total of 3 pins.It is part of the TOPFET? series.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this LED driver, the maximum supply voltage is configured to be 35V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 5.5V.A 5.5/35V power supply is used by the part.
BUK209-50Y,127 Features
Supplied from 13V
BUK209-50Y,127 Applications
There are a lot of NXP USA Inc. BUK209-50Y,127 Power Switches ICs applications.
- HDD, SSD
- Set-Top Boxes
- Portable Video Game Players
- USB Power Distribution
- HDD and SSD
- Hot-Swap Systems
- Wireless Headsets
- Storage (HDDs, SSDs)
- USB Ports/Hubs
- Portable GPS
