BUK213-50Y,118
| Parameters | |
|---|---|
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 3.6A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | 150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | TOPFET™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BUK2 |
| Pin Count | 5 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 35V |
| Power Supplies | 5.5/35V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 8.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
BUK213-50Y,118 Overview
It is packaged in the manner of a Tape & Reel (TR).The TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package contains it.The LED driver is mounted as Surface Mount.It owns General Purpose switch type.The temperature should be set to 150°C TJ to ensure reliable functioning.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.It belongs to the BUK2 family.A total of 4 terminations have been recorded.Currently, the lighting driver has a total of 1 functions.This LED driver has a maximum output of 8.5AV.The supply voltage of 13V is conducive to high efficiency.As a result, it has a total of 5 pins.These electrical components are part of the TOPFET? series.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The maximum supply voltage for this LED driver is 35V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 5.5V.This part's power supply is 5.5/35V.
BUK213-50Y,118 Features
Supplied from 13V
BUK213-50Y,118 Applications
There are a lot of NXP USA Inc. BUK213-50Y,118 Power Switches ICs applications.
- Hot Swaps
- Portable Video Game Players
- Solid State Drivers
- HDD and SSD
- Wireless/Networking Cards
- PC Cards
- Smartphone and PDA
- Set-top-box
- Portable/Handheld Devices
- USB Power Distribution
