BUK217-50Y,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | 150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | TOPFET™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BUK2 |
| Pin Count | 5 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 35V |
| Power Supplies | 5.5/35V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 25A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 90 μs |
| Output Peak Current Limit-Nom | 25A |
| Rds On (Typ) | 10m Ω |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 4.5mm |
| RoHS Status | ROHS3 Compliant |
BUK217-50Y,118 Overview
It is package in Tape & Reel (TR) case.There is a TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package that includes it.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.The temperature should be set to 150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Status Flag features are available on the lighting driver.It is part of the BUK2 family of LED drivers.The termination count is 4.Currently, there are 1 functions associated with the lighting driver.The LED driver output is limited to 25AV.This LED driver is equipped with a total of 5 pins.There is an electrical component included in the TOPFET? series.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.A maximum supply voltage of 35V is set in Vsup.In order to operate normally, the supply voltage (Vsup) must be maintained above 5.5V.The power supply of the part is 5.5/35V.
BUK217-50Y,118 Features
BUK217-50Y,118 Applications
There are a lot of NXP USA Inc. BUK217-50Y,118 Power Switches ICs applications.
- Mobile Communication Devices
- Wearable Devices
- Solid-State Drives
- HDD and SSD
- Portable Video Game Players
- Wireless/Networking Cards
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Hot Swap
